Daewoo DLP-20J1 Instruction Manual

Also see for DLP-20J1: Instruction manual Service manual Service manual

Contents

Daewoo DLP-20J1 Instruction Manual Manual pdf 14 page image

Start Up14The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purposeis to enable you to select the language that will be used for all the OSD (On Screen Display) menus. Theuser must enter a choice of language before proceeding further.The language entered at this stage can still be modified at any later time, by entering the LANGUAGEmenu (accessed from the FEATURES menu: see later section under MENU DESCRIPTION).The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Holland etc).Selection is made by use of the remote control CURSOR UP (A6) / CURSOR DOWN (A21) keysand CURSOR RIGHT (A20) / LEFT (A7) keys.Once you are satisfied with your selection, push the OK button (A18) to confirm your choice.The choice will briefly highlight in red, after which the menu will disappear.Note: The languages shown are subject to modification without prior notice.Automatic Tuning SystemIf you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C1), youmust power on the demodulator and tune Sky News before starting ATSS.ATSS = Automatic Tuning and Sorting System. To start the ATSS function:- Select “ATSS” function.- Adjust to the required country.- Press and hold the OK button (A18) to start the automatic tuning.The ATSS function has started when the phrase “Please Wait !” appears (in red characters ) in the helpinstructions box, below the Install menu. At this point release the OK button.When the ATSS function is finished, the stored programs are displayed on screen using Edit menupresentation (to Exit tuning before auto matic tuning is finished, press the remote control MENU button(A19).Language MenuAutomatic Tuning