Daewoo DLP-20J1 Instruction Manual

Also see for DLP-20J1: Instruction manual Service manual Service manual

Contents

Daewoo DLP-20J1 Instruction Manual Manual pdf 15 page image

GBDaily Use151) If stand-by indicator (B6) is red,then the TV set is in stand-bymode. You can switch on usingthe remote control POWERbutton (A1), the NUMBER0….9 buttons (A3), orPROGRAM UP (A6) / DOWN(A21) buttons. The front panelPROGRAM UP/ DOWNbuttons (B2) can also be used.Once on, the stand-by indicatorturns to green and the pictureappears on the screen.3) If stand-by indicator (B6) isflashing red, and green thenthe TV set is in child-lockmode.It is necessary to use theremote control POWERbutton (A1), NUMBER 0….9buttons (A3), or PROGRAMUP (A6) / DOWN (A21)buttons.The front panel PROGRAMUP/DOWN buttons (B2) willnot function. Once on, thestand-by indicator turns togreen and the pictureappears on the screen.2) If stand-by indicator (B6) is notlit, then the TV set is poweredoff. You must press the TV setfront panel MAIN POWERbutton (B1). If a picture doesnot appear, then the stand-byindicator will be red. In thiscase, use the remote control asindicated in 1).1) Pressing the remote control POWER button (A1), you can switch off to stand-by mode (low powerconsumption mode) which also allows quick restart by remote control (see above: SWITCHING ON TVSET).2) Pressing the TV set front panel MAIN POWER button (B1), you can completely power off the TV set. Inthis case, you must use the same front panel POWER button (B1) to switch on again (see above:SWITCHING ON TV SET).Remark: If a broadcast signal is not present after 10 minutes, the TV set will automatically turn to stand-by mode.Switching On TV SetSwitching Off TV Set