Daewoo DLP-20J1 Instruction Manual

Also see for DLP-20J1: Instruction manual Service manual Service manual

Contents

Daewoo DLP-20J1 Instruction Manual Manual pdf 19 page image

GBMenus DescriptionDEFAULT ZOOM CONTROLIf the ZOOM control is set to AUTO (A15, see page 18 and 24, FORMAT SELECTION), then the picture formatpresented is controlled by the received picture format signalling data embedded in the transmission. In theabsence of this signalling data (as can often be the case) a default format must be used. This default format canbe selected by the ZOOM AUTO function.LANGUAGEThis can be changed at any time by the user in the LANGUAGE menu (accessed via the FEATURES menu).All menus are removed within 60 seconds ifyou don t press any button. Press theremote control MENU button (A19) todisplay the main menu. Then, you have thechoice between several sub-menus:If you want to Exit the main menu, press theMENU button (A19) a second time.- To select one of the sub-menus, use theremote control CURSOR UP (A6), DOWN (A21) buttons.- To enter the selected sub-menu, press the remote control OK button(A18).Remark: In AV/S-VIDEO mode, the INSTALL menu is not availableand will not be selectable.The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.- Adjust the function using :- Select the desiredPosition by usingthe remote controlCURSOR UP (A6)or DOWN (A21)buttons.- The remote controlCURSOR LEFT(A7) or RIGHT(A20) buttons ifyou want tomodify the functionvalue.- The remote controlNUMBER 0...9buttons (A3) toenter directly newdata.- Store (if needed)by pressing theremote control OKbutton (A18).- Then Exit to mainmenu by pressingthe MENU button(A19).19Main MenuHow to use the sub-menus