16 Chapter 3: Operating Your TVReturning to the factory settingsIf you would like to return to the original video settings, as they were calibrated at the factory,follow these steps :1 With the TV on, press the MENU button. then “Video” menu will appear.2 Press the CCVOLBB buttons to set the “Settings” to ‘Preset’.The TV will remember the ‘Custom’ settings you had previously chosen. When you set“Settings” to ‘Custom’ again, your previous custom settings will be restored.Descriptions of video settingsThe contrast setting controls the relation between the light and black areas of the screen. If thelight areas are too bright and are losing details, press the CCVOL button; if the picture is gray andlacks contrast, press the VOLBB button.The brightness settings controls the overall amount of light in the picture. If the picture is toobright, press the CCVOL button; if the picture is too dark, press the VOL BB button.Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiplevertical lines at the edges of an object, press the CCVOL button; if the vertical edges of on-screenobjects are fuzzy, press the VOLBB button.The color setting controls the intensity of color. If the color is over-saturated, press the CCVOLbutton; if the color is washed out, press the VOLBB button.The tint setting controls the relationship of red and green in a picture. Tint is especially notice-able in flesh tones. If flesh tones seem too red or purple, press the VOLBB button; if flesh tonesare too green, press the CCVOL button.About AutoYou can watching TV with adjusted screen according to the light of your surrounding automati-cally.1 With the TV on, press the MENU button. Then “Video” menu will appear.2 Press the CCVOLBB buttons to set the “settings” to “Auto”.SelectVideoSettings : PresetContrastBrightnessSharpnessColorTintAdjust Next1SelectVideoSettings : CustomContrastBrightnessSharpnessColorTintAdjust Next2