Daewoo DV6T834N Owner's Manual

Also see for DV-6T834B: Owner's manual Owner's manual Owner's manual

Daewoo DV6T834N Owner's Manual Manual pdf 12 page image

11PRODUCT INFORMATION INSTALLATIONVarious methods in connecting with TVAUDIOVIDEOS-VIDEOANT INPUTS-VIDEO INPUT A/V INPUTCOMPONENT INPUTCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.RISK OF ELECTRIC SHOCKDO NOT OPEN20 18 16 14 12 10 8 6 4 321 19 17 15 13 11 9 7 5 3 1MethodMethod 11Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” Jack in rear panel of TV. Connect thecable to “ANT.IN” jack in rear panel of DVD-Video. Connect TV to DVD-Video. Connect “RF OUT” jack in DVD-Video with “ANT.IN” jack in TV with RF cable.MethodMethod 22 : Connecting to a TV that has a audio/video in jacksConnect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to AUDIO INjack in TV with connecting cable of Audio/Video jack. Select VCR mode by pressing TV/INPUT button in TV, youcan view more clear screen and sound than connection with RF cable only.MethodMethod 33 : Connecting to a TV that has a component video in jacksUse a component video cable (commercially available) in place of the yellow video cable to enjoy higher qualitypictures. The component video connection only supplies video (picture) in the DVD mode of the DVD-Video.Therefore, in order to use the VCR features or view TV channels at the DVD-Video, you still need to eitherconnect the RF coaxial cable between the ANT-OUT jack of the DVD-Video and the TV’s Antenna In jack, orconnect the video cable.MethodMethod 44 : Connecting to a TV that has a S-Video in jacksUse a S-Video cable (not supplied) to enjoy higher quality pictures.n In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in “CHANNELSET” screen in VCR operation.n In connecting RF cable to TV, set TV channel to CH3.Connecting with TV• VHF: 2 ~13 channels of TV , UHF: 14~69 channels of TV, CATV: Broadcasting is transmitted with cable frombroadcasting station by contract with the station and consumers. It does not need any antenna.• In/Out jack in Audio/Video terminal: - In: A jack used to receive signal required in this unit from other units. -Out: A jack used to send signal of this unit to other units.• Connect with Audio/Video terminal, you can enjoy more clear video and audio. (Use OUTPUT button in this remotecontrol to select video mode.)• If screen is broken in connecting COMPONENT Out to Pr, Pb, Y of TV COMPONENT In jack , connect to Cr, Cb, Y.Method 1Method 2Method 3Method 4A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 11