51THE OTHERSBefore doubting about troubles (VCR)• “Power On” does not work.• It does not work even in “Power On”.• A videotape is not inputted in.• On inputting a videotape, the tape isre-ejected.• A videotape is not ejected.• A channel on video and a play screendoes not appear.• Noise (screen noise) appears onscreen.• Noise appears on screen afterrecording.• While in playing, noise appears.• Sound and screen are irregular.• Sound comes out but screen does notappear.• Screen is irregular and stripes appears.• "Screen Error" message is displayed ina screen.• While recording and playing, the topof screen extremely waves.• A screen is not clear.• A screen at pause is trembling or slowscreen is not clear.ChecksSymptomä Please check whether a power plug is inserted in an electric outlet.ä Please check whether a videotape is inserted in.ä Try to insert a plug again.ä Please check whether a power plug is inserted in an electric outlet.ä Please check whether a videotape is in.ä Please check whether a videotape is inserted in a right direction (aside of transparent window should be on the upside)ä Have you inputted a videotape again just after the tape was ejected?Please try it again after fully ejecting it.ä When a videotape forces to be ejected, the tape may not be inputted.In the case, please pull out an outlet, and then push the tapesmoothly.ä That’s why a safe mode to protect a videotape is operatedautomatically. Please pull out the tape and input it again.ä In case the product is used for a long time, a videotape may not be ejectedfor a film inside may be stretched. In the case, please pull out a power plugfor about 10mins and then press [EJECT] button.ä Please check your antenna’s connection.ä TV channel should be fixed on video channel (3 or 4).ä Please check your antenna’s signal whether it may be weak. In case ofits weakness, please use a frequency amplifier connected with thedevice.ä Press [TV/VCR] and then let “VCR” is displayed on the display panel.ä While in no use of VCR, was it turned on?ä While in recording a program, do you watch another channel?ä Select TV by pressing [TV/VCR] button on remote control.ä While in playing a videotape, there may happen some noise or blot inthe part of the beginning of a videotape or resuming “PAUSE”, whichare not breakdown.ä Please press [TRACKING] for better screen. Videotape may be poor.Try to change it to another one.ä Please use a head-cleaner to clean VCR heads. VCR heads may becontaminated.ä Since VCR Play signals are not stable like a TV signals, screen may beunstable or curved while in playing. To fix the problem, pleasehorizontal adjustment.ä In case videotape is the one recorded by other products or old one,stripe may appear on the screen.ä Try to adjust the screen by [TRACKING+/–] button.ä Try to use a head-cleaner.ä Try to use a head-cleaner.ä Try to adjust the screen by [TRACKING+/–] button.A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 51