28Using advanced featuresPlay the tape automaticallyn This feature allows the VCR to automatically start playing when you insert a tape with the safety tabremoved.Press [SETUP] button and select“FUNCTIONS”.Move into “FUNCTIONS” with [ ] andthen, select the desired one with [ENTER]button.Press [ENTER] to switch between ONand OFF.- Select ON if you want a tape with its safetytab removed to start playing automaticallywhen the tape is inserted.- Select OFF if you do not want a tape withits safety tab removed to start playingautomatically.1122SETUPCLOCK SETTIMER RECORDINGSCHANNEL SETFUNCTIONSLANGUAGE SELECTFUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchMove: Select:End: SETUPENTERMove: Select:End: SETUPENTERSwitch the VCR to TV or VCR mode automaticallyn This feature controls whether the TV/VCR switch changes automatically to the VCR mode when the VCR is turned on.Press [SETUP] button and select “FUNCTIONS”.Move into “FUNCTIONS” with [ ] and then, select the desired one with[ENTER] button.Press [ENTER] to switch between ONand OFF.- Select ON if you want the VCR to switch tothe VCR mode when the VCR is turned onor a cassette is inserted. This only applies ifyou connect the ANT.IN and RF OUT jacksof your VCR and TV and watch your VCR onchannel 3 of your TV.- Select OFF if you want the VCR to remainin the TV mode. This is useful if you watchyour VCR on the TV’s video input and youdon’t want your antenna/cable signalinterrupted by the VCR.2211 FUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchMove: Select:End: SETUPENTERA83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 28