Basic Operation20 21OSD ON & OFFOutput SelectPress [DVD] button.If DVD mode is correctly selected, DVD on the operation displaywindow is lit. Then, REMOTE button works as DVD function. Press the[DVD] button, then the mode of DVD-Video Player becomes to theOPERATION mode.Press [VCR] button.If VCR mode is correctly selected, DVD on the operation displaywindow goes out. Then, REMOTE button works as VCR function. Pressthe [VCR] button, then it becomes to the VCR OPERATION mode.Press [INPUT] button.When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, itis not operated in PLAY, REC and DVD mode.Call the player’s "SETUP".1Choose “VCR SETUP”.And press the [OK] button.2Select “OSD ON/OFF”.If you want OSD OFF mode, select it and press [OK] button toconfirm.Then OSD characters are not displayed in the normal picture.3This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change itto OFF mode.VCR SETUPCLOCK SETLANGUAGE SETRF OUTPUT SETOSD ON/OFFPR+/-:SELECTOK:CONFIRM SETUP:ENDOSD ON/OFFONOFFPR+/-:SELECTOK:CONFIRM SETUP:ENDSETUPTIMER PROGRAMPR PRESETVCR SETUPTAPE CONTROLPR+/-:SELECTOK:CONFIRM SETUP:ENDOSD (On Screen Display) ON & OFFTo Select DVDTo Select VCRTo Select Watch Modes or External Input Press [VCR] button on the remote control to change into VCR Mode and follow the procedurebelow.Call the player’s "SETUP",choose "VCR SETUP", then "CLOCK SET".1Move to the position you want to change and type in thenew values.Wait a few seconds after typing a one-digit number.2 Store with [OK] button and exit with [SETUP] button.CLOCK SET0-9:SETUP (HOUR)/➝:CORRECT SETUP:ENDTIME - - : - -DATE - - / - - /- - - -CLOCK SET0-9:SETUP (HOUR)/➝:CORRECTOK:CONFIRM SETUP:ENDTIME 06:05DATE 06/08/2006(SUN)Setting time and dateSetting time and date➝➝