Daewoo SF-7200D User Manual

Also see for SF-7200D: Instruction manual

Daewoo SF-7200D User Manual Manual pdf 18 page image

VCR Operation34 35More Functions The player machine records the complete sound signal transmitted by the TV station. On the mono VCR, you will hear the normal mono sound.In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with ahigh-quality Hi-Fi sound system.This means you can enjoy• films with excellent stereo sound• films of full-length concerts in high quality stereo• films with impressive Surround Sound using additional Surround equipment• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal soundDuring Stop, the player displays what the current station is broadcasting. Whenyou switch to another station or the current station changes the sound mode, yourplayer displays the programme and sound mode on screen (if not, press AUDIO).• “STEREO” = stereo“BIL I / BIL II ”=bilingualnothing= monaural soundDuring Playback, the player displays what is recorded onthe cassette (if not, press AUDIO).• “Hi-Fi” = stereo/bilingualnothing = monaural soundSTOP SP PR10 EUROSTEREO ONPLAY SP Hi-FiL+RDuring a stereo performance (playback-”Hi-Fi”/ broadcast- “STEREO”):Hi-Fi stereo ➝ left audio channel only ➝ right channelonly ➝ the normal mono sound track of a Hi-Fi cassette• During broadcasting a bilingual performance : Mainlanguage (original sound track) ➝ sub-language(dubbed) ➝ both main language and sub-language.• For mono performances , there is no choice available.PLAY SP Hi-FiL+RHI-FiLEFTHi-FiRIGHTHi-FiOFFThe Hi-Fi systemWhat you can listen toChoice of sound outputConnections and Assembling If you are using a RCA cable, select the AV input on the TV to see the picture from the player. If you are not using a RCA cable, select the button number on the TV reserved for video input tosee the picture from the player.If you are not using a RCA cable, your player can transmit pictures and sound to the TV via the coax aerialcable. Just tune the TV to the player's transmitting channel (factory set to UHF CH52). Tune the TV carefully toensure the best pictures and sound.Once you have carried out the steps in "Connecting up your playerwith RF lead" , switch on your TV.Press the [OK/ENTER] button of the player’s remote control longerthan 5 seconds to call the player´s test picture.Tune the TV to the test picture using the channel pre-set functions ofyour TV as described in its manual.When you have found the test picture, store it under the buttonnumber on your TV for player input.Press the [OK/ENTER] button of the player’s remote control againlonger than 5 seconds to release the test picture.1• If the quality of the test picture transmitted to the TV is poor dueto interference caused by a station transmitting on channel 52,you can tune the player to a different transmitting channel. Finda free channel between 21 and 69 on your TV.Call the player’s "SETUP" choose "VCR SETUP" then "RFOUTPUT SET".Type in the free channel.Store and exit.2• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TVmay help (refer to the TV manual).• Without a RCA cable, you will not get stereo sound from a TV capable of stereo sound.To the TV via antenna cable (if you are not using a RCA cable)STOP SP PR10 EUROBILIBILIIBILI+IIRF OUTPUT SET0-9:SELECT (21-69)/➝:SELECT (BG/DK)OK:CONFIRM SETUP:ENDCH 52SYSTEM BG DK➝