VCR Operation26 27Recording When your urgent business happens suddenly in watching TV or you want to record the current TVprogram for the desired time, follow the procedures below.11 First, follow the steps 1 to 4 in “Recording With VCR”.22 Press [REC] button as much as you want. See the “Recording Times Table”below.Once continuous recording until you press STOP buttonTwice recording for 30 mins from current time3 (times) recording for 1 hour21 recording for 10 hours22 returning to the status of Once Press33 To stop Recording mode, press [STOP] button more than 5 seconds.One Touch timer Recording (OTR)Tuning in New Stations The TV and player are switched on. To see the picture from your player, press the input or AV (Audio/Video) button on the TV.To complete the set-up of your video recorder when theauto set has not stored all of the channels or when you wishto store a new channel.Call the video’s "SETUP", choose "PR PRESET".1Select "MANUAL SET".2Choose any unused location number "----" or "P-xx" ...It's simplest to use the same location number on both theTV and video.... and confirm.3Set the station you want:• the programme location number;• the proper broadcast system for your location (BG/DK)• the broadcast system you want (Aerial(CH) orCable(CC)),• You can directly enter the real channel number with the[0 to 9] buttons, or search by pressing [œœ/√√],• The fine tuning you can adjust,• Change or create the station name.4Once you see the station you want, store it.Tune in further stations (from step 3 onwards) or exittuning mode.5PR PRESETAUTO SEARCHMANUAL SETPR ERASEPR ALIGNPR+/-:SELECTOK:CONFIRM SETUP:ENDMANUAL SETPR+/-: UP/DOWN/➝: SELECTOK:CONFIRM SETUP:ENDMANUAL SETPR01 P-01 PR08 P-08PR02 P-02 PR09 P-09PR03 P-03 PR10 P-10PR04 P-04 PR11 P-11PR05 P-05 PR12 ----PR06 P-06 PR13 ----PR07 P-07 PR14 ----PR+/-:SELECTOK:CONFIRM SETUP:ENDPR 04STANDARD BGRECEPTION AERIALAUTOSEARCH CH _ _FINE TUNINGNAME _ _ _ _MANUAL SETPR+/-: UP/DOWN/➝: SELECTOK:CONFIRM SETUP:ENDPR 03STANDARD BGRECEPTION AERIALAUTOSEARCH CH 03FINE TUNINGNAME _ _ _ _MANUAL SETPR+/-: UP/DOWN0/1: CHANGE/CREATEOK:CONFIRM SETUP:ENDPR 03STANDARD BGRECEPTION AERIALAUTOSEARCH CH _ _FINE TUNINGNAME _ _ _ _Tuning➝➝