100Figure 4-96 Export: Please connect the peripheral device first and then go to the following interface.Click Export button, you can see there is a corresponding “Config_Time” folder. Double clickthe folder, you can view some backup files. Import: Here you can import the configuration files from the peripheral device to currentdevice. You need to select a folder first. You can see a dialogue box asking you to select afolder if you are selecting a file. System pops up a dialogue box if there is no configuration fileunder current folder. After successfully import, system needs to reboot to activate new setup. Format: Click Format button, system pops up a dialogue box for you to confirm currentoperation. System begins format process after you click the OK button.Note: System cannot open config backup interface again if there is backup operation in theprocess. System refreshes device when you go to the config backup every time and set currentdirectory as the root directory of the peripheral device. If you go to the configuration backup interface first and then insert the peripheral device,please click Refresh button to see the newly added device.4.15.7 DefaultWarning!After you use default function, some your customized setup may lose forever! Please think twicebefore you begin the operation!
