1305.5 AlarmClick alarm function, you can see an interface is shown as Figure 5-16.Here you can set device alarm type and alarm sound setup.Figure 5-16Please refer to the following sheet for detailed information.Please make sure current device can upload the alarm.Type Parameter FunctionAlarmTypeVideo loss System alarms when video loss occurs.Cameramasking(Tampering)System alarms when camera is viciouslymasking.Disk full System alarms when disk is full.Disk error System alarms when disk error occurs.External alarm Alarm input device sends out alarm.Temperature high System alarms when temperature is high.Battery low System alarms when battery voltage is low.Operation Prompt Check the box here, system can automaticallypops up an alarm icon on the Alarm button in themain interface when there is an alarm.AlarmSoundPlay alarm sound System sends out alarm sound when an alarmoccurs. You can specify as you wish.Sound path Here you can specify alarm sound file.5.6 Setup5.6.1 Image5.6.1.1 Remote Device5.6.1.1.1 Remote DeviceIn the main menu, from Setup->Remote device ->Remote, you can go to an interface shown asFigure 5-17.
