Daikin ERHQ011BA Installer's Reference Manual

Also see for ERHQ011BA: Installer's reference guide

Contents

EHBH/X16Daikin Altherma - Low Temperature Split4P313776-1 – 2012.05Installer reference guide287 InstallationExample measure resistance between K1M/1 and K5M/13:7.4.5 To connect the user interface1 Connect the user interface cable to the indoor unit.2 Fix the cable with cable ties to the cable tie mountings.Fixation of the user interface to the indoor unit1 Insert a screwdriver into the slots underneath the user interfaceand carefully separate the faceplate from the wallplate.2 Fix the wallplate of the user interface to the frontplate of the unit.3 Cut off a 2 wire conductor.4 Connect the wires to the user interface as shown below.From the rear5 Reinstall the faceplate onto the wallplate.Fixation of the user interface to the wall in case of installation asroom thermostat1 Insert a screwdriver into the slots underneath the user interfaceand carefully separate the faceplate from the wallplate.2 Fix the wallplate of the user interface to wall.3 Connect the wires to the user interface as shown below.From the rearFrom the lefta User interface delivered with the unitb Optional user interfaceNOTICEThe PCB is mounted in the faceplate of the user interface.Be careful NOT to damage it.K1M K2MK2MK2M1 3 5 132 4 6 14K5M1 3 5 132 4 6 141 3 5 132 4 6 14ΩΩX2MX5MA2P A2P21a bNOTICEBe careful NOT to distort the shape of the backside of theuser interface by overtightening the mounting screws.a Notch this part for the wiring to pass through with nippersetc.b Secure the wiring to the front part of the casing using thewiring retainer and clamp.NOTICEBe careful NOT to pinch the wiring when attaching thefrontplate to the unit.NOTICEThe PCB is mounted in the faceplate of the user interface.Be careful NOT to damage it.b aPCB1xb aPCB1xaPCBb1x