Daikin FDKR200AV16 Installation Manual

11Tr Outdoor Unit Field Wiring Instruction:1q> PowerSupply to indoorunitField Earth Wire1q> to indoor & 3q>Power Supply FieldWireNote:•(LV)CommunicationWire to indoor unit1. Minimum 25mm or more gap to be maintained between High Voltage(HV) and Low Voltage (LV) wiresduring field installation.2. For Indoor to outdoor communication, use only 2 core shielded cable of 0.5 mm2 for field wiring.11. OIL REFILL CHARGE GUIDELINES1. In case of majority Oil spill/Loss by Leakage in field ------Remove all remaning oil from the compressor. Add fresh oil charge in the compressor as per below table.Indoor Outdoor Refill oil chargeltr/30m pipe lengthFDKR200AV16 RZR200AY16 1.656FDKR300AV16 RZR300AY16 2.395FDKR400AV16 RZR400AY16 2.632OIL REMOVING PROCEDURE :1. To remove all remaining oil from the compressor, first remove compressor from the system.Take it out side & tilt in such a way so that all oil can come outside from suction port.Note : Check quality of oil, if oil color is clear (not black or turbide), use same oil for refilling & top up freshoil to maintain total refill quantity as per above table. If oil color is not clear, do not use this oil, refill withfresh oil only.OIL REFILL PROCEDURE :1. Charge oil through the suction port of compressor.13