3) Factory Reset:-ln Menu mode, user can reach to [;�ii -symbol by left and right key and can do Factory Reset by pressing ,.J -Enter key when l;��i symbol blinks.On Factory Reset, below setting gets applied:Temp- 24°CMode-CoolFan Speed-High7 days Programmable timer- All set timers will get cleared and will get ''---:---2• and timer active will also get"OFF".5. RESET/CANCELPress this key to reset or cancel the current operation.6. 6.1 TEMPERATURE SETTING7. 7.1Temperature can be changed by" UP" or" DOWN" Keys .These keys will be used for changing timers and clock in timer or clock setting mode. These keys willnot change set-temperature in timer or clock setting mode.RIGHT/LEFTPress this key to move the cursor left or right and move to other options.8. TIMERWhen presses "TIMER" Key, llim�II TU llwell TH II FR l!SA!&!I and I DAILY! will appear for 2 seconds andafter that IMO! will start flashing which shows enter in MONDAY Timers. For other daysmove to other days by LEFT/RIGHT Key.There is 1 On-Timers & 1 Off-Timer for any day of week, with added"Daily'' feature.(a) Press Enter to set day. On set, selected day and ON TIME will get"ON" and"HOUR" of Timer will start that itblinking. On press LEFT/RIGHT key switch between HOUR & MINUTES. Blinking of hour/minute can bechanged by UP/DOWN Key.(b) On set/ cancel on-timer, OFF TIME symbol will get ON and user can set/cancel off-timer with same way as on-timer.After setting the Timer's , llm,B[MQII rullwell THIIOOI.Ml&!I and I DAILY! will appear for 2 seconds and after thatIMO! will start flashing which shows user can enter in MONDAY Timers. For other days user can move to otherdays by LEFT/RIGHT Key.(c) After Sunday we get option of DAILY. We can set timers of daily in the same way as we did for other days.Note:(1) If"Daily" is selected then only"Daily" Timer will be effective for every Day.(2) On set of any timer, time will be shown for 2 sec on screen.(3) On cancel of any timer"--:--" will be shown for 2 sec on screen.(4) AM and PM will change when Hour changes from 12 to 1.9. ENERGY SAVEREnergy saver Mode work only in cool mode.In Energy saver mode, Set Temperature become "26" and Fan speed become "Medium". Set temperature and fanspeed will not get changed.Energy saver mode will get cancel by Mode Change or in standby mode or by pressing energy saver key again.On cancel Energy Saver, Fan Speed and set temperature will achieve their last status.10. ON/OFF SWITCHThis key is used to switch ON/OFF the power of the unit.24