Introduction Si04-115viii1.1.4 Using IconsIcons are used to attract the attention of the reader to specific information. The meaning of eachicon is described in the table below:1.1.5 Using Icons ListCautionCheck to see if the parts and wires are mounted and connected properly, andif the connections at the soldered or crimped terminals are secure.Improper installation and connections can cause excessive heat generation,fire or an electrical shock.If the installation platform or frame has corroded, replace it.Corroded installation platform or frame can cause the unit to fall, resulting ininjury.Check the grounding, and repair it if the equipment is not properly grounded.Improper grounding can cause an electrical shock.Be sure to measure the insulation resistance after the repair, and make surethat the resistance is 1 Mohm or higher.Faulty insulation can cause an electrical shock.Be sure to check the drainage of the indoor unit after the repair.Faulty drainage can cause the water to enter the room and wet the furnitureand floor.Icon Type ofInformation DescriptionNote:Note A “note” provides information that is not indispensable, but maynevertheless be valuable to the reader, such as tips and tricks.CautionCaution A “caution” is used when there is danger that the reader, throughincorrect manipulation, may damage equipment, loose data, getan unexpected result or has to restart (part of) a procedure.WarningWarning A “warning” is used when there is danger of personal injury.Reference A “reference” guides the reader to other places in this binder orin this manual, where he/she will find additional information on aspecific topic.
