Optional Accessories EDUS04101176 Room Air Conditioners J-Series13.2 Wired Remote Controller13.2.1 Installation ManualSwitch box(Field supplied parts)Machine screws (M4 x 16)For the field supplied switch box,use optional accessoriesKJB1111A or KJB2121A.KJB2121ACAUTION1. No switch box or staple is supplied. Prepare them locally.2. No remote controller cord is supplied. Prepare the optional remote controller cord 4 wire.3. Be sure to turn off the power to any apparatus connected prior to mounting.4. Prior to mounting equipment, touch something metallic such as a doorknob to remove staticelectricity from your body. Never touch the remote controller board or the adapter board.5. Keep the wiring away from any other power source lines to avoid electric noise (external noise).6. Select a flat surface, wherever possible, to mount the remote controller. To prevent deformationof the cases, do not overtighten the mounting screws.Insert a bladed screwdriver into the concave ( ) in the remote controller lower case to remove theupper case assembly (two locations).(1) Exposed mountingSecure the remote controller lower case with thetwo supplied wood screws.(2) Embedded mountingSecure the remote controller lower case with thetwo supplied machine screws.The remote controller board is located on theupper case. Take care not to scratch theboard with the screwdriver.1. Securing the remote controller lower caseUpper caseLower caseScrewdriver To remove, insert and twistthe screwdriver slightly.Wood screws (φ3.5mm x 16mm)KJB1111A
