5-55.4 OperationFollow the procedure shown below to operate theunit.Cooling water pipe connectionsFor water-cooled operation, connect and passwater through a pipe.[Note] Use fresh water for the cooling water.Connection procedure1. Connect the inlet joint ( ).2. Connect the outlet joint ( ).Removal procedure1. Remove the outlet joint ( ).2. Remove the inlet joint ( ).Connect the cooling water joints as shown below.Connection procedure:Insert the ship-side joint into the unit-side joint.Push them together until you feel them click.Exercise caution regarding the splashingo f c o o l i n g wa t e r w h e n c o n n e c t i n g a n ddisconnecting the joints.Cooling water outlet-sidepipe connection procedureInstalled on theship sideARemoval procedure:While pressing the female-side joint (A) asindicated by the arrow in the above figure, pullthe ship-side joint toward you.(Note) During water-cooled operation,do not touch the condenser fanwith your hands. (The condenserfan starts and stops to cooling thecontroller box and inverter box.)Outlet joint Inlet jointhttps://daikin-p.ru
