Daikin REYQ-TA Series Service Manual

Also see for REYQ120TATJU: Operation manual

Contents

Daikin REYQ-TA Series Service Manual Manual pdf 61 page image

SiUS371614E MAIN/SUB SettingRemote Controller 483. MAIN/SUB Setting3.1 BRC1E73SituationThe MAIN/SUB setting is necessary when 1 indoor unit is controlled by 2 remote controllers. When you use 2remote controllers (control panel and separate remote controller), set one to MAIN and the other to SUB.SettingThe remote controllers are factory setting to MAIN, so you only have to change one remote controller from MAINto SUB. To change a remote controller from MAIN to SUB, proceed as follows:The designation of the main and sub remote controllers can be swapped. Note that this change requires turningthe power OFF and then ON again.Service settings menu Item 2Switch Main Sub Controller Main RCSub RCSelect Switch Main Sub Controllerand press Menu/OK button.Servicesettings menuis displayed.Item 2 isdisplayed.Basic screenis displayed.Press and holdthe Cancelbutton for 4seconds ormore.Press theCancelbutton once.Press the Cancel button.Item 2 isdisplayed.Press the Menu/OKbutton.Select Main RC orSub RC using theS/T (Up/Down)buttons, and thenpress the Menu/OKbutton.