4 About the unitInstaller reference guide8RZAG35~60A2V1BR32 split series4P540076-1A – 2018.11123.2.2 To remove the accessories from theoutdoor unit1 Lift the outdoor unit.CAUTIONOnly handle the outdoor unit as follows:2 Remove the accessories at the bottom of the package.1×1× 1× 1× 1× 6× 3× 1×b ec da f g ha General safety precautionsb Outdoor unit installation manualc Fluorinated greenhouse gases labeld Multilingual fluorinated greenhouse gases labele Drain plug (located on the bottom of the packing case)f Drain cap (1)g Drain cap (2)h Energy label4 About the unitWARNING: FLAMMABLE MATERIALThe refrigerant inside this unit is mildly flammable.4.1 Overview: About the unitThis chapter contains information about:▪ Identification of the outdoor unit4.2 IdentificationNOTICEWhen installing or servicing several units at the same time,make sure NOT to switch the service panels betweendifferent models.4.2.1 Identification label: Outdoor unitLocation5 Preparation5.1 Overview: PreparationThis chapter describes what you have to do and know before goingon-site.It contains information about:▪ Preparing the installation site▪ Preparing the refrigerant piping▪ Preparing the electrical wiring5.2 Preparing the installation siteDo NOT install the unit in places often used as work place. In caseof construction works (e.g. grinding works) where a lot of dust iscreated, the unit MUST be covered.Choose an installation location with sufficient space for carrying theunit in and out of the site.