82 • Network Tools Genie Monochrome Series-GigE Vision CameraAfter installation, all system NIC devices have the Sapera Network Imaging driver enabled. Only the NICconnected to a Genie camera requires the Network Imaging driver enabled to capture images from Genie. TheNetwork Imaging driver streams image data efficiently to image buffers.Select other NIC devices in the system and disable the Network Imaging Driver if they are not used with a Geniecamera.Recovering a Camera with an Unknown Persistent IPWhen a Genie camera has been configured with a persistent IP address, that camera can not be controlled if its IPaddress has been lost or forgotten. The DALSA Network Configuration tool provides a function to recover camerasand reset them back to the DHCP/LLA mode. The camera can also be set to a new persistent IP address immediatelyif required.Important: To recover a Genie camera, the camera MAC address must be known. DALSA ships all Geniecameras with a label stating its serial number and MAC address. Additionally the NIC connected to the Geniemust be configured for LLA mode.To recover a Genie:• Start the Network Configuration program from the windows start menu: Start•Programs•DALSA•NetworkInterface•DALSA Network Configuration Tool.• From the menu bar click on Advanced and then on Recover Camera.• On the dialog enter the camera MAC address and click the Recover Camera button.Camera Recovery Dialog
