Dalsa Stop Action 4M30 User Manual

Contents

Dalsa Stop Action 4M30 User Manual Manual pdf 17 page image

4M Stop Action Camera Manual PRELIMINARYDALSA 03-32-10121-09173e: HowSoftware Interfacto Control the Camerarolled through the serial interface. The camera can also beafter it has been set up correctly. Functions availablemera functions such as gain and sync signal sourcee serial interface uses a simple ASCII-based protocol and the camera does notquire any custom software.ng commands, remember that:• A carriage return ends each command.• The camera will answer each command with either > or Error x:Error Message >. The > is always the last character sent by the camera.• The camera accepts both upper and lower case commands.• The following parameter conventions are used in the manual:• i = integer valuef = real numberm = member of a set. Value must be entered exactly as displayed on help screen.All camera features can be contused without the serial interfaceinclude:• Controlling basic ca• Data readout control• Generating a test pattern for debugging• Thre• Serial Protocol Defaults• 8 data bits• 1 stop bit• No parity• No flow control• 9.6Kbps• Camera d nooes t echo charactersCommand FormatWhen enteriOK