4M Stop Action Camera Manual PRELIMINARY 233.3.3 ting tPurpose: Sets the camera’s pixel rate. Refer to Table 8and Table 9 for adescription of how pixel rates relate to the camera’s Camera Linkmode.Syntax Elementse 2 or 3:ughput of 130 MHzughput of 160 MHz:260: 65 MHz pixel rate with a total throughput of 260 MHz320: 80 MHz pixel rate with a total throughput of 320 MHz, use the command gcp orsot 2603.4 Setting Exposure Mode, Frame Rate andYou have a choice of operating in one of four exposure modes. To select how you wantthe camera’s frame rate to be generated:1. You must first set the camera’s exposure mode using the sem command.Set he Camera’s Pixel RateSyntax: clm m: mIf using Camera Link mod130: 65 MHz pixel rate with a total thro160: 80 MHz pixel rate with a total throIf using Camera Link 15 or 16 (4M60 only)Notes: • To retrieve the current pixel rateget sot.Example:Exposure TimeOverview2. Next, if operating in exposure mode 2 or 7, use the command ssf to set the frame rateand, if operating in exposure mode 2, use the set command to set the exposure time.DALSA 03-32-10121-09