Xtium-CL MX4 User's Manual CamExpert Quick Start • 37Advanced Control CategoryThe Advanced Control category groups parameters for configuring camera control signals, boardsync outputs and other advanced settings.Parameter DescriptionsThe following table describes the CamExpert Advanced Control category of Sapera LT parameters.Acquisition server notes, if applicable, indicate if parameter availablility or supported values aredependent on the selected frame grabber acquisition server and acquisition device.DisplayNameParameter Description NotesInternal FrameTriggerCORACQ_PRM_INT_FRAME_TRIGGER_ENABLE Enables/disables the acquisition device’sinternal frame trigger. Boolean parameter(TRUE or FALSE).Applies toareascan camerasonly.Internal FrameTrigger Frequency(in Hz)CORACQ_PRM_INT_FRAME_TRIGGER_FREQ Internal frame trigger frequency in Hz. Setto the required frame rate when usinginternal frame trigger to control cameraacquisition. Valid range is 0.001-10000Hz.Line Sync Source CORACQ_PRM_EXT_LINE_TRIGGER_ENABLECORACQ_PRM_INT_LINE_TRIGGER_ENABLECORACQ_PRM_SHAFT_ENCODER_ENABLESelects the line trigger source for linescancameras, unless free-running.Applies to linescancameras only.Interal LineTrigger Frequency(in Hz)CORACQ_PRM_INT_LINE_TRIGGER_FREQ Sets the internal line trigger frequency, inHz. Applies only when the Line Sync Sourceis set to Internal Line Trigger.Applies to linescancameras only.Camera LineTrigger FrequencyMin (in Hz)CORACQ_PRM_CAM_LINE_TRIGGER_FREQ_MIN Sets the camera’s minimum line triggerfrequency. Minimum value is 1Hz.Applies to linescancameras only.Camera LineTrigger FrequencyMax (in Hz)CORACQ_PRM_CAM_LINE_TRIGGER_FREQ_MAX Sets the camera’s maximum line triggerfrequency. Maximum value is 10000000 Hz.Applies to linescancameras only.Camera Controlmethod selectedCORACQ_PRM_TIME_INTEGRATE_ENABLECORACQ_PRM_CAM_TRIGGER_ENABLECORACQ_PRM_LINE_TRIGGER_ENABLEEnables or disables an available cameracontrol method. Each supported controlmethod has one or more operating modesto choose from; refer to the parameters:Camera Trigger Method SettingTime Integration Method Setting.
