Danby Designer DMW1048SS Owner's Manual

Also see for Designer DMW1048SS: Owner's manual

Contents

Danby Designer DMW1048SS Owner's Manual Manual pdf 5 page image

IMPORTANT SAFETY INSTRUCTIONS14. Cooking utensils may become hot because ofheat transferred from the heated food. Potholdersmay be needed to handle the utensil.15. Do not cover or block any openings on theappliance.16. Do not store or use this appliance outdoors. Donot use this product near water, for example, neara kitchen sink, in a wet basement, or near aswimming pool, and the like.17. Do not operate this appliance if it has a damagedcord or a plug, if it is not working properly or if ithas been damaged or dropped.18. Do not immerse cord or plug in water. Keep cordaway from heated surface. Do not let cord hangover edge of table or counter.19. Use only thermometers which are specificallydesigned for use in microwave ovens.20. Do not operate any heating or cooking appliancebeneath this appliance.21. Be certain the glass tray and roller ring are inplace when you operate the oven.22. WARNING: It is hazardous for anyone other thana trained person to carry out any service or repairoperation which involves the removal of any coverwhich gives protection against exposure tomicrowave energy.23. Liquids, such as water, coffee, or tea can beoverheated beyond the boiling point withoutappearing to be boiling due to surface tension ofthe liquid. Visible bubbling or boiling when thecontainer is removed from the microwave oven isnot always present.THIS COULD RESULT IN VERY HOT LIQUIDSSUDDENLY BOILING OVER WHEN A SPOONOR OTHER UTENSIL IS INSERTED INTO THELIQUID.To reduce the risk of injury to person:a. Do not overheat the liquid.b. Stir the liquid both before and halfwaythrough heating it.c. Do not use straight-sided containers withnarrow necks.d. After heating, allow the container to stand inthe microwave oven for a short time beforeremoving the container.e. Use extreme care when inserting a spoon orother utensil into the container.SAVE THESE INSTRUCTIONS!GROUNDING INSTRUCTIONSThis appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electricshock by providing an escape wire for the electric current.WARNING: Improper use of the grounding plug can result in a risk of electric shock.Electrical RequirementsThe electrical requirements are a 120 volt 60 HZ, AC only, 20 amp. It is recommended that a separate circuitserving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must be pluggedinto a wall receptacle that is properly installed and grounded. A short power-supply cord is provided toreduce risk of becoming entangled in or tripping over a long cord.Extension CordIf it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3 blade groundingplug and a 3-slot receptacle that will accept the plug on the microwave oven.Notes: 1. If you have any questions about the grounding or electrical instructions, consult a qualifiedelectrician or service person.Notes: 2. Neither Danby nor the dealer can accept any liability for damage to the oven or personal injuryresulting from failure to observe proper electrical connection procedures.Radio or TV InterferenceShould there be any interference caused by the microwave oven to your radio or TV, check that theCONTINUES ON PAGE 43