Danby Designer DMW1048SS Owner's Manual

Also see for Designer DMW1048SS: Owner's manual

Contents

Danby Designer DMW1048SS Owner's Manual Manual pdf 9 page image

POWER PADOven automatically cooks at high power. For a lowerpower level, set cook time, touch POWER and enternumber (1-9) for lower power level.TIMER PADIndependent kitchen timer. Set any time even whileoven is operating. Touch TIMER pad, set time thenSTART. Touch RESET to cancel.COOK PADCook at one power level for a period of time, thenautomatically switch to another power level for theremaining cook time.COOK BY WEIGHTTouch COOK BY WEIGHT pad, enter weight of meataccurately, then START. After partial cooking, ovenstops, leaving time on display. Turn over meat whenoven stops after partial cooking. Re-touch START tofinish.DEFROST BY WEIGHTAutomatic defrosting for large meats. Controls powerlevel to thaw without excessive outside warming.SPEED DEFROSTAutomatically programs lower power levels for evendefrosting. Touch SPEED DEFROST, set time andSTART.CLOCKTouch pad once, touch number pads and CLOCK toset clock.RESETTouch to clear display of unused time after cooking,also cancel timer.START/STOP PADTouch as final step in setting oven. Touch to stopmicrowaving while oven is in operation (re-touch tocontinue timing shown on display). Will not stop timer.OPERATING INSTRUCTIONS1. SETTING THE CLOCKA. Setting the clock when the oven is plugged in.l When the oven is first plugged into a wall outlet,touch the CLOCK pad once, the display will show“ENTER CLOCK TIME”.l Enter the correct time of day by touching thecorrect number pads. You must set at least 3digits (one for hour(s) and two for minutes). Forminute less than 10, precede the “minutes” digitby a 0. Example: for 5 minutes past 2, set 2:05.The colon will flash between hour and minutedigits. If you prefer not to have the clock displayed,set the clock for 00:00 and the display will onlyshow a colon.l Touch CLOCK to lock in the time.Colon will stop flashing and clock will begin tokeep current time. After clock has been set, theword prompt clock will always show on thedisplay unless oven is in a cooking operation.B. Changing the clock time.l Touch the CLOCK pad once, the display will show“ENTER CLOCK TIME”l Enter the correct time of day by touching thecorrect number pads. You must set at least 3digits (one for hour(s) and two for minutes). Forminute less than 10, precede the “minutes” digitby a 0. Example: for 5 minutes past 2, set 2:05.The colon will flash between hour and minutedigits. If you prefer not to have the clockdisplayed, set the clock for 00:00 and the displaywill only show a colon.l Touch CLOCK to lock in the time.Colon will stop flashing and clock will begin tokeep current time. After clock has been set, theword prompt clock and time of day will alwaysshow on the display unless oven is in a cookingoperation.7