Danfoss DLX 2.0 Installation Manual

Danfoss DLX 2.0 Installation Manual Manual pdf 5 page image

Installation Guide DLX seriesL00410622-01 5Table 1.2: Symbols appearing on the product labelSymbol DescriptionDischarge time: High voltages may be present inside the inverter for 1 hour afterswitch OFFRefer to User Guide: Look for further details in the User Guide, which is availableon the Danfoss websiteHot Surface: The heat sink on the back of the inverter can reach temperatures upto 90 °CDanger: High voltages are presentDisposal: Do not dispose in general waste! Collect the various parts separatelyand recycle them according to local regulationsCE Marking: The product meets the EU safety, health and environmentalprotection requirementsS – NO: Serial Number for inverter identification1.3. Unpacking and InspectionAfter unpacking the inverter safely, check that all components are present and in anundamaged condition. If damaged, contact your supplier immediately!1.3.1. Lifting and Carrying the InverterConsidering the inverter’s weight of 20-22 kg, (depending upon model), lifting andcarrying the inverter must be correctly performed to prevent back injuries.Figure 1.3.1: Correct lifting of the inverter• When lifting, bend the knees, and keepthe back straight.• Lift carefully; hold the inverter close to thebody and let the leg muscles do the work.• Turn the whole body as one unit to avoidtwisting the lower back.• Carry the inverter close to the body.