Danfoss FC 100 Series Operating Instructions Manual

Also see for P11K: Quick guide

Contents

Danfoss FC 100 Series Operating Instructions Manual Manual pdf 99 page image

7.3.3 1-** Load / MotorPar. No.#Parameter description Default value 4-set-up Change duringoperationConver-sion indexType1-0* General Settings1-00 Configuration Mode null All set-ups TRUE - Uint81-03 Torque Characteristics[3] Auto Energy Optim.VT All set-ups TRUE - Uint81-06 Clockwise Direction [0] Normal All set-ups FALSE - Uint81-2* Motor Data1-20 Motor Power [kW] SR All set-ups FALSE 1 Uint321-21 Motor Power [HP] SR All set-ups FALSE -2 Uint321-22 Motor Voltage SR All set-ups FALSE 0 Uint161-23 Motor Frequency SR All set-ups FALSE 0 Uint161-24 Motor Current SR All set-ups FALSE -2 Uint321-25 Motor Nominal Speed SR All set-ups FALSE 67 Uint161-28 Motor Rotation Check [0] Off All set-ups FALSE - Uint81-29 Automatic Motor Adaptation (AMA) [0] Off All set-ups FALSE - Uint81-3* Adv. Motor Data1-30 Stator Resistance (Rs) SR All set-ups FALSE -4 Uint321-31 Rotor Resistance (Rr) SR All set-ups FALSE -4 Uint321-35 Main Reactance (Xh) SR All set-ups FALSE -4 Uint321-36 Iron Loss Resistance (Rfe) SR All set-ups FALSE -3 Uint321-39 Motor Poles SR All set-ups FALSE 0 Uint81-5* Load Indep. Setting1-50 Motor Magnetisation at Zero Speed 100 % All set-ups TRUE 0 Uint161-51 Min Speed Normal Magnetising [RPM] SR All set-ups TRUE 67 Uint161-52 Min Speed Normal Magnetising [Hz] SR All set-ups TRUE -1 Uint161-58 Flystart Test Pulses Current 30 % All set-ups FALSE 0 Uint161-59 Flystart Test Pulses Frequency 200 % All set-ups FALSE 0 Uint161-6* Load Depen. Setting1-60 Low Speed Load Compensation 100 % All set-ups TRUE 0 Int161-61 High Speed Load Compensation 100 % All set-ups TRUE 0 Int161-62 Slip Compensation 0 % All set-ups TRUE 0 Int161-63 Slip Compensation Time Constant SR All set-ups TRUE -2 Uint161-64 Resonance Dampening 100 % All set-ups TRUE 0 Uint161-65 Resonance Dampening Time Constant 5 ms All set-ups TRUE -3 Uint81-7* Start Adjustments1-71 Start Delay 0.0 s All set-ups TRUE -1 Uint161-73 Flying Start [0] Disabled All set-ups TRUE - Uint81-77 Compressor Start Max Speed [RPM] SR All set-ups TRUE 67 Uint161-78 Compressor Start Max Speed [Hz] SR All set-ups TRUE -1 Uint161-79 Compressor Start Max Time to Trip 5.0 s All set-ups TRUE -1 Uint81-8* Stop Adjustments1-80 Function at Stop [0] Coast All set-ups TRUE - Uint81-81 Min Speed for Function at Stop [RPM] SR All set-ups TRUE 67 Uint161-82 Min Speed for Function at Stop [Hz] SR All set-ups TRUE -1 Uint161-86 Trip Speed Low [RPM] SR All set-ups TRUE 67 Uint161-87 Trip Speed Low [Hz] SR All set-ups TRUE -1 Uint161-9* Motor Temperature1-90 Motor Thermal Protection [4] ETR trip 1 All set-ups TRUE - Uint81-91 Motor External Fan [0] No All set-ups TRUE - Uint161-93 Thermistor Source [0] None All set-ups TRUE - Uint8How to Programme the Frequ... VLT® HVAC Drive Operating InstructionsMG.11.AD.02 - VLT® is a registered Danfoss trademark 997 7