Danfoss HC8000 Series User Instructions

Contents

user instructions

Danfoss HC8000 Series User Instructions Manual pdf 1 page image

1User InstructionsElectronic Programable Room ThermostatsHC8000 Series Heat/Cool & HP8000 Heat Pump ThermostatsHP8000 HeatpumpThermostat (coverflap removed)HC8000 Heat/CoolThermostat (coverflap removed)HC8000 Heat/CoolThermostat 3 Speedfan (cover flapremoved)Product Features• 7-day, 5/2-day or 24 hour programing, set by installer• 2, 4 or 6 programed events each day, set by installer (canalso be set up as regular non-programable thermostat)• AM/PM or 24 hour clock display set by user• Fahrenheit or Centigrade temperature display, set by user• Easy to use Daylight saving time change, set by user• Electronic memory for retention of settings• Factory preset programs which can be edited by user• Available in battery and 24 Volt versions• Available in heat / cool versions, 1 heat / 1 cool & 2 heat /2 cool models• Available in heat-pump versions, 2 heat / 1 cool & 3 heat /2 cool models, each with emergency heatNote 1: Where “plus” is shown between two buttons, both buttons must bepressed togetherNote 2: Where “or” is shown between two buttons, either buttons can bepressed to either increase or decrease settingNote 3: Where “then” is shown between rows of buttons, followinstructions for top row first before moving on to instructions forsecond rowNote 4: When using ▲, ▼, + or - buttons during programing, a singlepress of the button changes the value by one unit, if the button isheld down the value will continue to change until the button isreleased. Cooling Set Point(if flashing, Optimum Start Control is in operation)Cooling Output Indicator (if flashing,cooling delay operating)Heating Set Point(if flashing, Optimum Start Control isin operation)Heating Output Indicator (if flashing,heating delay operating)ThermostatMode SelectFan ModeSelectLow Battery(flashing)Fan Output & Speed Indicator(if flashing, fan about to come on)Event Number Indicatorwhen programingIncrease TemperatureRoom/Outdoor Temperature (if flashingremote sensor is faultyDecreaseTemperatureVacation ModeDay of WeekLCD DISPLAYClock Display/MeasuredTemperature Display