Danfoss MCB 152 Operating Instructions Manual
Also see for VLT series: Service manualInstallation guideOperating instructionsService manualInstallation guide
                                                  | |
Contents
| 
6.5 Configuring PROFIsafe with Siemens TIAPortalThis section explains how to configure the PROFIsafefieldbus communication between Safety Option MCB 152and a Siemens device with Siemens TIA Portal.6.5.1 Configure the HardwareConfigure the PROFINET communication with the F-PLCusing VLT® PROFINET MCA 120 Installation Guide.1. In the SIEMENS TIA portal, select Open the projectview. Double-click Devices and Networks. TheHardware Configuration dialogue box opens.2. Select the Danfoss device in the network viewand drag it into the work space:130BE085.103. The project view shows the F-PLC and theDanfoss Device:130BE086.104. Assign the name to the Danfoss device. Thename must be the same as shown in 12-08 HostName:130BE087.105. Select the following I/O protocol: PROFIsafe 30-6/6 Bytes, Standard Telegram 30.130BE088.106. Edit the required PROFIsafe settings underProperties tab.130BE089.10The following 3 parameters can be changed, but normallyit is only necessary to change the F_Dest_Add parameter:• F_Source_Add - the PROFIsafe address of thePROFIsafe master.• F_Dest_Add - the destination address of SafetyOption MCB152. This address must be the sameas set in MCT-10 Set-up Software,42-61 Destination Address.• F_WD_Time - the watchdog time for thePROFIsafe connection. This setting depends onthe speed of the PROFINET connection and thenumber of followers.6.5.2 Programming Safety Functions withSiemens Step7 and TIA PortalRefer to the Siemens documentation for more informationon distributed safety. Refer to the following documentationfor information on how to use safety inputs and outputsfor passivation and reintegration.• Industrial Software SIMATIC Safety - Configuringand Programming. Programming and OperatingManual.• Fail-safe Controllers SIMATIC Safety Integrated.Emergency Stop with Acknowledgement inCategory 4 according to EN 954-1.• Fail-safe Controllers SIMATIC Safety Integrated.Passivation and Reintegration of F-I/O consideringas example the ET 200S.Configuring the Safety Opti... Safety Option MCB 15224 Danfoss A/S © 10/2014 All rights reserved. MG37F10266 |
Related manuals for Danfoss VLT series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine