Danfoss MCD3000 Series Manual

Also see for MCD3000 Series: Manual

MCD3000 SeriesMG.15.A2.22 – VLT is a registered Danfoss trademar 11Installation Control circuit examplesExample 1. A basic installation where motor operationis controlled using the MCD3000 Local Control Panel.Notes:1. The MCD3000 must be in local mode to functionwith this circuit. Use the [LOCAL/REMOTE] pushbutton to switch between local and remotemodes.Example 2. MCD3000 installed with a line contactorand operated via a remote two wire start circuit withreset push button.Notes:1. The MCD3000 must be in remote mode tofunction with this circuit. Use the[LOCAL/REMOTE] push button to switch betweenlocal and remote modes.2. Relay Output A must be programmed for the LineContactor function. Refer Par. 36 Relay A -Function Assignment.