Danfoss MCO 305 Operating Instructions Manual

Also see for MCO 305: Operating instructions Design guide Design guide

MCO 305 Operating Instructions__ How to Install __MG.33.K2.02 – VLT is a registered Danfoss trademark 13 Electrical InstallationAll control cables must be screened and the cable screen must be connected to earth at both ends. It isvery important to use the correct cable for encoders to avoid noise problems, always follow the prescrip-tions of the encoder supplier. See also FC 300 Design Guide (MG.33.AX.XX) for more information regardingEMC correct cable installation. MCO 305 Control TerminalsFrame size A2 and A3:All MCO 305 terminals are located behind the C-option terminal cover, see illustration.Frame size A5, B1 and B2:All MCO 305 terminals are located next to theFC 300 control card. Remove the front cover to getaccess, see illustration.