Danfoss TS715 Si Installation & User's Instructions

Also see for TS715 Si: Installation & user's instructions Installation & user's instructions User instruction Operating instructions

Contents

Danfoss TS715 Si Installation & User's Instructions Manual pdf 12 page image

12 What is a programmer?What is a programmer?... an explanation for householders.Programmers allow you to set ‘On’ and ‘Off ’ time periods.Some models switch the central heating and domestic hotwater on and off at the same time, while others allow thedomestic hot water and heating to come on and go off atdifferent times.Set the ‘On’ and ‘Off ’ time periods to suit your own lifestyle.On some programmers you must also set whether you wantthe heating and hot water to run continuously, run under thechosen ‘On’ and ‘Off ’ heating periods, or be permanently off.The time on the programmer must be correct. Some typeshave to be adjusted in spring and autumn at the changesbetween Greenwich Mean Time and British Summer Time.You may be able to temporarily adjust the heatingprogramme, for example, ‘Override’, ‘Advance’ or ‘Boost’. Theseare explained in the manufacturer’s instructions.The heating will not work if the room thermostat has switchedthe heating off. And, if you have a hot-water cylinder, thewater heating will not work if the cylinder thermostat detectsthat the hot water has reached the correct temperature.The text below has been edited and approvedby the Plain English Campaign, who has issued a CrystalMark to be displayed with it.Please note: A timeswitch is a single channel programmer. It willallow you to set your system’s On and Off periods.