Danfoss VLT AAF006 Operating Instructions Manual

Also see for VLT AAF006: Service manual

Contents

Danfoss VLT AAF006 Operating Instructions Manual Manual pdf 15 page image

3.2.3 Power Terminal LocationsConsider the position of the terminals when designing forcable access. See Illustration 3.6, Illustration 3.7,Illustration 3.8, and Illustration 3.988.0[3.5]204.0[8.0]289.7[11.4]29.0[1.1]266.2[10.5]476.0[18.7]259.7[10.2]130BC636.10Illustration 3.6 Terminal Location of D14 with Disconnect284.1[11.2]83.7[3.3]167.2[6.6]241.9[9.5]271.9[10.7]505.0[19.9]486.0[19.1]130BC637.10Illustration 3.7 Terminal Location of D14 without Disconnect65.0[2.6]130.0[5.1]343.0[13.5]19.6[.8]628.7[24.8]194.0[7.6]75.0[3.0]719.1[28.3]389.0[15.3]730.7[28.8]130BC638.10Illustration 3.8 Terminal Location of E1 with Disconnect719.1[28.3] 609.1[24.0]75.0[3.0]188.0[7.4]112.0[4.4]224.0[8.8]537.0[21.1]605.6[23.8]130BC639.10Illustration 3.9 Terminal Location of E1 without DisconnectNOTICEEach terminal allows up to 4 cables with cable lugs oruse of a standard box lug. Ground is connected to therelevant termination point in the unit.Mechanical Installation Operating Instructions12 Danfoss A/S © 09/2014 All rights reserved. MG90V30233