Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

6 Application Set Up Examples6.1 IntroductionNOTEWhen the optional safe stop feature is used, a jumper wiremay be required between terminal 12 (or 13) and terminal37 for the frequency converter to operate when usingfactory default programming values.The examples in this section are intended as a quickreference for common applications.• Parameter settings are the regional default valuesunless otherwise indicated (selected in0-03 Regional Settings)• Parameters associated with the terminals andtheir settings are shown next to the drawings• Where switch settings for analog terminals A53 orA54 are required, these are also shown6.2 Application ExamplesParametersFC4-20 mA+24 V+24 VD IND IND INCOMD IND IND IND IN+10 VA INA INCOMA OUTCOM12131819202729323337505354554239A 54U - I+-130BB675.10Function Setting6-22 Terminal 54 LowCurrent4 mA*6-23 Terminal 54High Current20 mA*6-24 Terminal 54 LowRef./Feedb. Value0*6-25 Terminal 54High Ref./Feedb.Value50** = Default ValueNotes/comments:Table 6.1 Analog Current Feedback TransducerParametersFC+24 V+24 VD IND IND INCOMD IND IND IND IN+10 VA INA INCOMA OUTCOM12131819202729323337505354554239A54U - I0 - 10V+-130BB676.10Function Setting6-20 Terminal 54Low Voltage 0.07 V*6-21 Terminal 54High Voltage10 V*6-24 Terminal 54Low Ref./Feedb.Value0*6-25 Terminal 54High Ref./Feedb.Value50** = Default ValueNotes/comments:Table 6.2 Analog Voltage Feedback Transducer (3-wire)ParametersFC+24 V+24 VD IND IND INCOMD IND IND IND IN+10 VA INA INCOMA OUTCOM12131819202729323337505354554239A54U - I0 - 10V+-130BB677.10Function Setting6-20 Terminal 54Low Voltage 0.07 V*6-21 Terminal 54High Voltage10 V*6-24 Terminal 54Low Ref./Feedb.Value0*6-25 Terminal 54High Ref./Feedb.Value50** = Default ValueNotes/comments:Table 6.3 Analog Voltage Feedback Transducer (4-wire)Application Set Up Examples VLT® AQUA DriveOperating InstructionsMG20M902 - VLT® is a registered Danfoss trademark 456 6Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net