Danfoss VLT FC 100 LonWorks Manual

Also see for FC 100 Series: Operating instructions Instruction manual Manual Manual Programming guide

Danfoss VLT FC 100 LonWorks Manual Manual pdf 40 page image

5.8 Network Timer Functions5.8.1 Control Word Time-out Functionpar.8-03Control Timeout Time and par.8-04Control Timeout Function provide a means for the frequency converter to control communication to acontroller node.If a valid control word has not been received within the time specified in par. 8-03, the action specified in par. 8-04 will be performed. The default actionis OFF (no action).The range of par. 8-03 is: 0.1 to 18,000 seconds (or 5 hours).An update of the control word is triggered by the following SNVT's:• nviStartStop• nviResetFault• nviControlword• nviDrvSpeedStpt• nviRefPcnt• nviRefHz• nviFeedback 1,2,3• nviSetPoint 1,2,35.8.2 Min. Send Time (Inhibit Timer)Variablename:SNVTtype: Default value: Min value: Max value:nciMinSendT SNVT_elapsed_tm 00:0:0:500 0 0:0:0:100 0 0:01:05:535Variable used for limiting bus traffic by setting a minimum sending timer (inhibit timer).Applies for all output variables.Format: Days Hours:Minutes:Seconds:Milliseconds.5 Configuration of the system VLT® FC 100 LonWorks40 MG.11.E2.02 - VLT® is a registered Danfoss trademark5