Danfoss VLT FC 100 LonWorks Manual

Also see for FC 100 Series: Operating instructions Instruction manual Manual Manual Programming guide

Danfoss VLT FC 100 LonWorks Manual Manual pdf 54 page image

8.3 Parameter Group 1111-00 Neuron IDRange: Function:View the Neuron chip's unique Neuron ID number.0 N/A* [0 - 0] View the Neuron chip's unique Neuron ID number.11-10 Drive ProfileOption: Function:This parameter allows selecting between LONMARK Functional Profiles.[0] * VSD profile The Danfoss Profile and the Node Object are common for all profiles.11-15 LON Warning WordRange: Function:0 N/A* [0 - FFFF ] This parameter contains the LON specific warnings.Bit Status0 Internal fault1 Internal fault2 Internal fault3 Internal fault4 Internal fault5 Reserved6 Reserved7 Reserved8 Reserved9 Invalid type change for changeable types10 Initialization error11 Internal communication error12 Software revision mismatch13 Bus not active14 Option not present15 LON input (nvi/nci) exceeds limits11-17 XIF RevisionRange: Function:0 N/A* [0 - 0] This parameter contains the version of the external interface file on the Neuron C chip on the LONoption.11-18 LonWorks RevisionRange: Function:0 N/A* [0 - 0] This parameter contains the software version of the application program on the Neuron C chip onthe LON option.11-21 Store Data ValuesOption: Function:This parameter is used to activate storing of data in non-volatile memory.[0] * Off Store function is inactive.[2] Store all setups Stores all parameter values in the E 2PROM. The value returns toOff when all parameter values havebeen stored.8 Parameters VLT® FC 100 LonWorks54 MG.11.E2.02 - VLT® is a registered Danfoss trademark8