Configuring VME Option Boards2-11014–001867Table 2–6 Default Jumper Settings for VDA/128 Boards (All Board Positions)Jumper Pins Status FunctionE1 In Extended address spaceE2 In SupervisorE3 Out DPRAM program spaceE4 Out DPRAM data spaceE5 In DPRAM program or dataE6 Out DPRAM user spaceE7 Out Interrupt request 7E8 Out Interrupt request 6E9 Out Interrupt request 5E10 In Interrupt request 4 (selected)E11 Out Interrupt request 3E12 Out Interrupt request 2E13 Out Interrupt request 1E14 In Factory reservedE33 In Bus request Level 3 (selected)E34 Out Bus request Level 2E35 Out Bus request Level 1E36 Out Bus request Level 0E37 Out Factory reservedE38 Out Factory reservedE39 Out Factory reservedE40 Out P/O BG jumperingE41 In P/O BG jumperingE42 In P/O BG jumperingE43 Out RWD releaseE44 Out 3.1 ms timeoutE45 Out 6.3 ms timeoutE46 Out 12.5 ms timeoutE47 In 25.0 ms timeoutE48 Out 12.5 ms timeoutE49 Out 25.0 ms timeoutE50 In 50.0 ms timeoutE51 Out 100.0 ms timeoutE52 Out SYSFAILE53 1–2 In Small PROMSE54 1–2 In Small PROMSE55 In Terminate coaxial cable at host adapterE56 1–2 In Transport node address3–4 In ” ” ”5–6 In ” ” ”7–8 In ” ” ”9–10 In ” ” ”11–12 In ” ” ”13–14 In ” ” ”15–16 In ” ” ”E57 Out BCLR signalNotation IndicatesIn Jumper installed.Out Jumper removed.
