Page 59IS-01206 No Card PickedA card was not picked successfully.Possible Cause 1: The input hopper is empty.Solution 1: Fan the edges of the cards so the printer picks one card at atime and then load cards in the input hopper. Push the input hopper coverclosed until it latches.Possible Cause 2: One or two cards are jammed going into the printer.Solution 2 a: Release the stuck card(s). Fan the cards in the input hopperagain to separate them.Solution 2 b: Cleaning liquid is making cards slip on the pick roller. Wait oneor two minutes with the input hopper open to allow the pick roller to dry.If the problem occurs again, run a cleaning card, change the cleaningsleeve, and then clean the rollers in the printer.Related Topics:"Loading cards" on page 5"Cleaning the printer" on page 21
