DataCard SR200 User Manual

Also see for SR200: User guide User guide Installation guide Service manual Hardware and driver installation manual

Contents

DataCard SR200 User Manual Manual pdf 6 page image

vi SR200 & SR300 Printer User GuideLiability statementThis Datacard® product has been built to the high standards of DataCard CorporationCorporation (doing business as Datacard Group). Please note and heed the WARNINGand CAUTION labels that have been placed on the equipment for your safety. PLEASEDO NOT ATTEMPT TO OPERATE OR REPAIR THIS EQUIPMENT WITHOUTADEQUATE TRAINING. ANY USE, OPERATION OR REPAIR IN CONTRAVENTION OFTHIS DOCUMENT IS AT YOUR OWN RISK. BY ACCEPTANCE OF THIS SYSTEM YOUHEREBY ASSUME ALL LIABILITY CONSEQUENT TO YOUR USE OR MISUSE OF THISEQUIPMENT. DATACARD CORPORATION SHALL NOT BE LIABLE FOR ANYINCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGE OF ANY KIND.Equipment specifications, applications and options are subject to change at the solediscretion of DataCard Corporation without notice.Safety All Datacard® products are built to strict safety and reliability specifications in accordancewith UL60950-1 and Canadian requirements, and the Low Voltage Directive 2006/95/EC.Therefore, safety issues pertaining to operation and repair of Datacard® equipment areprimarily environmental and human interface.The following basic safety tips are given to ensure safe installation, operation andmaintenance of Datacard® equipment and are not to be considered as comprehensive onall matters of safety.Safe environment• Connect equipment to a grounded facility power source. Do not defeat or bypassthe ground lead.• Place the equipment on a stable surface (table) and ensure floors in the work areaare dry and non-slip. Insulated rubber floor mats are preferred.• Know the location of equipment branch circuit interrupters or circuit breakers andhow to turn them on and off in case of emergency.• Know the location of fire extinguishers and how to use them. Use only ABC typeextinguishers on electrical fires.• Know local procedures for first aid and emergency assistance at the customerfacility.• Use adequate lighting at the location of the equipment.• Maintain the recommended range of temperature and humidity in equipment area.• Do not use this product in an environment containing volatile or flammablecompounds.• Keep paper and foreign materials off the printer.• Keep all dust, dirt, food, liquids, etc. away from the printer at all times.Safe human interface• Use proper lifting techniques when moving or installing the equipment.• Use standard electrostatic discharge (ESD) precautions when working on or nearelectrical circuits.• Do not defeat or disconnect safety interlocks.