DataLocker DL3 User Manual

Also see for DL3: User guide User manual Setup guide User guide

Contents

DataLocker DL3 User Manual Manual pdf 11 page image

11USER PASSWORDThe DL3 supports the creation of a user password. The user will have access to alldata on the drive; however, the user will not be able to access certainadministrative options and controls.Note: You must change the default administrator password before creating auser password.Step 1: Power on your DL3 by pluggingit in to your computer. If the drive isalready connected, press the[DISCONNECT] button and then pressthe [CONNECT] button on the nextscreen.Step 2: Once at thekeypad screen,enter the adminpassword. If thepassword has notbeen changed,enter the defaultStep 3: Press the[SETUP] button on thetouch screen. If the[SETUP] button is notselected within 3seconds, theDataLocker DL3™ willPassword, 000000, and press the [↵ ]symbol.automatically connect to the hostcomputer.Step 4: At the setup menu press the [USER PASSWORD] button.