DATA FORMATCODE IDENTIFIER TABLECODE AIM STANDARD DATALOGIC STANDARD Custom2/5 interleaved ] I y N2/5 industrial ] X y P2/5 normal 5 bars ] S y O2/5 matrix 3 bars ] X y QEAN 8 ] E 4 AEAN 13 ] E 0 BUPC A ] X y CUPC E ] X y DEAN 8 with 2 ADD ON ] E 5 JEAN 8 with 5 ADD ON ] E 6 KEAN 13 with 2 ADD ON ] E 1 LEAN 13 with 5 ADD ON ] E 2 MUPC A with 2 ADD ON ] X y FUPC A with 5 ADD ON ] X y GUPC E with 2 ADD ON ] X y HUPC E with 5 ADD ON ] X y ICode 39 ] A y VCode 39 Full ASCII ] A y WCODABAR ] F y RABC CODABAR ] X y SCode 128 ] C y TEAN 128 ] C y kISBT 128 ] C4 fCode 93 ] G y UCIP/39 ] X y YCIP/HR ] X y eCode 32 ] X y XMSI ] M y ZCode 11 ] H y bCode 16K ] K 0 pCode 49 ] T y qRSS Expanded Linear and Stacked ] e 0 tRSS Limited ] e 0 vRSS 14 Linear and Stacked ] e 0 u• AIM standard identifiers are not defined for all codes: the X identifier is assigned to thecode for which the standard is not defined. The y value depends on the selected options(check digit tested or not, check digit tx or not, etc.).• When customizing the Datalogic Standard code identifiers, 1 or 2 identifier characters canbe defined for each code type. If only 1 identifier character is required, the second charactermust be selected as FF (disabled).• The code identifier can be singly disabled for any code by simply selecting FF as the firstidentifier character.• Write in the Custom character identifiers in the table above for your records.63
