DS5100 REFERENCE MANUAL181ADVANCED SCANNER CONFIGURATIONThe ADVANCED configuration mode (instead of the Wizard) is available when starting theGenius program and is addressed to expert users being able to complete a detailed scannerconfiguration. By choosing this option it is possible either to start a new scanner configurationor to open and modify an old one. The desired parameters can be defined in the followingwindow, similar to the MS Explorer:Figure 13 - Genius Parameter Explorer WindowHost Mode ProgrammingThe scanner can also be configured from a host computer using the Host Modeprogramming procedure, by commands via the serial interface. See the Host ModeProgramming manual on the downloadable Genius mini-DVD zip file.Alternative Layouts The ID-NET network is a built-in high-speed interface dedicated for high-speed scannerinterconnection. ID-NET is in addition to the Main and Auxiliary serial interfaces. If youneed to install an ID-NET network refer to chapters 4 and 5 of this Reference Manual.The scanner can also be configured by reading programming barcodes. See the "SetupProcedure Using Programming Barcodes" printable from the downloadable Genius mini-DVD zip file. If you need to install an Ethernet network, Fieldbus network or Pass-Through network,refer to chapters 4 and 5 of this Reference Manual.
