Datalogic DS6300 Reference Manual

Also see for DS6300: Quick reference guide Reference manual Quick reference guide Reference manual Reference manual

Datalogic DS6300 Reference Manual Manual pdf 22 page image

DS63001211.7.3 Fieldbus NetworkThe Fieldbus (Ethernet, Profibus and DeviceNet) model offers connectivity without anyconverter or adapter needed.The DS6300 master Fieldbus communicates with a remote host (for ex. remote PCconnected via Internet) by means of a cable connected to the Fieldbus (Ethernet, Profibus orDeviceNet) connector provided.The local Lonworks 9-pin female connector connects the Fieldbus master reader to the firstslave reader of the system, while the 26 D-sub male connector may be connected to theC-BOX 100 to supply the reader.The slave readers (DS6300 master/slave models) are connected together through the localLonworks connectors. Only the 9-pin female connector of the last slave reader must beterminated by the BTK-6000 terminator. No terminator must be inserted in the Fieldbusmaster reader, since it is internally integrated.Single P.S.The DS6300 (Ethernet, DeviceNet or Profibus model) master is connected to a fieldbusremote Host. It can be activated by a signal generated by the remote Host or be alwaysactive if working in Automatic operating mode.Figure 16 – Fieldbus Single P.S.As described before, C-BOX 100 can supply a maximum number of 3 readers. Therefore, ifusing more than 3 readers, connect the different groups by means of a cable (CAB6111X)not bringing power to, and power each group individually.FieldbusMasterRemote HostSlave 2C-BOX 100PWR120Slave 3P.S.CAB601X