Datalogic DS8100A Reference Manual

Also see for DS8100A: Reference manual Reference manual Reference manual

Contents

Datalogic DS8100A Reference Manual Manual pdf 57 page image

SOFTWARE CONFIGURATION 33.2.2 Genius™ Network Setup Through MasterThe Network Setup allows configuring your Local Lonworks Network through the Masterusing Genius™.Three different procedures are available to define the number of network slave scanners,their label and address according to two main conditions:Condition Available Procedure FeatureUnknown Slave Addresses Net-Autoset automatically assigns random addresses toslave or Stand Alone scanners.Network Wizard customizes the network (slave label andaddress definition and physical identificationof a specific slave within network), updatesconfiguration to a file and makes it ready tobe sent to the Master.Known Slave AddressesExpress Network Setup automatically performs all the operations ofthe Network Wizard apart from the physicalidentification of a specific slave scanner.NOTEThe Network Setup procedure as described requires Genius™ softwareversion 1.06 or later. In addition, the Net-Autoset procedure requiresscanner software version 6.40 or later.1. The first operation to perform is the configuration of your scanner as "Master" from theLocal Device Network Settings item in the Device Menu, see figure below:Figure 54 – Local Device Network Settings41