REFERENCES145The message is sent in the following format:"Message" CR LF5.3.3 Reception Warning MessageThe Master cradle can transmit warning messages to the Host regarding wrongreception of data. Example:/*Two-Ways Out of Sequence!(.....)*/This message is transmitted to the Host by the Master cradle when theMaster cradle receives a closing string from the Host for a Two-way txcommunication, but this was either not open or already closed, therefore thedata will be lost. See par. 5.9.3.5.3.4 Master Header/Terminator SelectionIn addition to the standard header/terminator selection, the Master cradle can add itsown header/terminator to the entire message sent to the Host.In the STAR-System™ network headers and terminators for all RF Devices aredisabled by default.The Master header and terminator default values are as follows depending on theinterface selection towards the Host:RS232: no header, terminator CR-LFWEDGE: no header, terminator ENTERSee par. 5.4.1 and 5.4.2 .5.4 DATA FORMATFor an overview of Message Formatting see Chapter 6.5.4.1 Header/Terminator SelectionThe header/terminator selection is not effected by the reading of the restore defaultcode. In fact, header and terminator default values depend on the interface selection:RS232: no header, terminator CR-LFWEDGE: no header, terminator ENTER
