Enter Configuration Exit and Save ConfigurationÌ$+;Î WEDGE Ì$-?Î57I NTER- CODE DELAYdelay between codes transmitted to HostÌFG.ÎRead 2 numbers from the table where:00 = DELAY disabled01-99 = DELAY from 1 to 99 seconds delay disabledKEYBOARD SETTINGALPHANUMERIC KEYBOARD SETTINGThe device (reader or cradle) can be used with terminals or PCs with various keyboard typesand nationalities through a simple keyboard setting procedure.The type of computer or terminal must be selected before activating the keyboard settingcommand.Keyboard setting consists of communicating to the device how to send data corresponding tothe keyboard used in the application. The keys must be set in a specific order.Press and release a key to set it.Some characters may require more than one key pressed simultaneously during normal use(refer to the manual of your PC or terminal for keyboard use). The exact sequence must beindicated to the reader in this case pressing and releasing the different keys.Example:If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit thecharacter "$" to the video, to set the "$", press and release "Shift" then press and release "4".Each pressed and released key must generate an acoustic signal on the device; otherwiserepress the key. Never press more than one key at the same time, even if this corresponds tothe normal use of your keyboard.Press "Backspace" to correct a wrong key entry. In this case the device emits 2 beeps.Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard settingprocedure. "SHIFT" must be repressed for each character and cannot be substituted by"CAPS LOCK".setting the alphanumeric keyboardÌFB0TÎRead the code above.Press the keys shown in the following table according to their numerical order.
