Datalogic Gryphon I GBT4400 Product Reference Manual

Also see for Gryphon I GBT4400: Product reference guide Quick reference guide Product reference guide Quick reference guide Quick reference guide

Contents

Maxicode Enter/Exit Programming ModeProduct Reference Guide 215Maxicode Set Length 2This feature specifies one of the bar code lengths for Maxicode Length Control. Length 2 is themaximum label length if in Variable Length Mode, or the second fixed length if in Fixed LengthMode. Characters can be set from 0001 to 0145 characters in increments of 0001 (pad withzeroes).See page 265 for detailed instructions on setting this feature.Select Maxicode Length 2 SettingTo configure this feature, scan the ENTER/EXIT PRO-GRAMMING MODE bar code above, then the bar codeat left followed by the digits from the Alphanumericcharacters in Appendix D, Keypad representing yourdesired character(s). End by scanning the ENTER/EXITbar code again.Make a mistake? Scan the CANCEL bar code to abortand not save the entry string. You can then start again atthe beginning.CANCEL$CMXL2~DEFAULT Length 2 is 0145 Characters