GRYPHON™124 CONFIGURATION4.1 CONFIGURATION METHODS4.1.1 Reading Configuration BarcodesThis manual can be used for complete setup and configuration of your reader byfollowing the setup procedures in this chapter (see par. 4.2 for an overview).If you wish to change the default settings, this manual provides completeconfiguration of your reader in an easy way.To configure your reader:1) Open the folded page in Appendix C with the hex-numeric table and keep itopen during the device configuration.2) Read the Enter Configuration code ONCE, available at the top of each pageof configuration.3) Modify the desired parameters in one or more sections following theprocedures given for each group.4) Read the Exit and Save Configuration code ONCE, available at the top ofeach page of configuration.Reference notes describing the operation of the more complex parameters are givenin chapter 5.4.1.2 Using DL Sm@rtSetDL Sm@rtSet is a Windows-based utility program providing a quick and user-friendlyconfiguration method via the RS232 interface.It also allows upgrading the software of the connected device (see the DL Sm@rtSetUser's Manual for more details).4.1.3 Copy CommandA previously configured device (Master), can be used to send its configuration directly toother devices of the same type (Slaves). The particular procedure for each device isgiven in par. 5.10.
