SOFTWARE CONFIGURATION10777.4 ETHERNET CONFIGURATION (STATIC IP ADDRESSING)If you want to connect to VisiSet™ using Ethernet then follow the procedure below.In order to find the reader using the VisiSet™ Look For Devices On Network tool, thereader and VisiSet™ must be on the same network (not through a sub-network orrouter).The Factory Default static IP address parameter settings for all Matrix Family readers are: IP Address = 172.24.24.1 Subnet Mask = 255.255.0.0 Gateway Address = 172.24.255.2541. Before changing the Ethernet network settingson the PC running VisiSet™, close any openapplications which use network resources (i.e.Outlook, or Web browser).2. On the Configuration PC, from the ControlPanel> Network Connections, right-click on theLAN connection icon and open the propertieswindow.3. Select the Internet Protocol (TCP/IP) item andopen the properties window.4. Set the IP Address fields as shown in the figureand click OK to save.5. In VisiSet select the Ethernet CommunicationChannel in the Options> Communicationwindow. Then press the Look For Devices On Network button. The Matrix reader willappear with its default IP Address in thelist.6. Input the IP address from the list in theIP Address field of the Device EthernetChannel Address section of theVisiSet™ Options> Communicationwindow (or double-click on the device inthe list). The IP port number is 51235.Then click Save.7. Perform a Connect (to device) fromVisiSet™.172 . 24 . 255 . 254255 . 255 . 0 . 0172 . 24 . 255 . 254
